Broseley eVolution 7 Insert Betriebsanleitung PDF herunterladen (Seite 22)

Smoke Exempt Requirements

FURTHER REQUIREMENTS:

1. It is important to follow these instructions in order to achieve clean burning and to

maximise the efficiency from the stove

2. Do not leave the fire unattended after refuelling until flames are well established

on the newly charged logs

3. Refuelling on to a low fire bed If there is insufficient burning material in the fire bed

to light a new fuel charge, excessive smoke emission can occur. Refuelling must be

carried out onto a sufficient quantity of glowing embers and ash that the new fuel

charge will ignite in a reasonable period. If there are too few embers in the fire bed,

add suitable kindling to prevent excessive smoke

4. Fuel overloading The maximum amount of fuel specified in this manual should not

be exceeded, overloading can cause excess smoke.

5. Operation with door left open Operation with the door open can cause excess

smoke. The appliance must not be operated with the appliance door left open

except as directed in the instructions.

6. Dampers left open Operation with the air controls or dampers open can cause

excess smoke. The appliance must not be operated with air controls or dampers

door left open except as directed in the instructions.

MS11-11 Issue 3 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Keine Kommentare

Broseley eVolution 7 Insert Betriebsanleitung Seite 22